Cloudbot 101 Custom Commands and Variables Part Two

if statement Streamlabs Chatbot execute response on if else “request”

streamlabs command variables

Following it would execute the command as well. To get started, check out the Template dropdown. It comes with a bunch of commonly used commands such as !

In the above example, you can see hi, hello, hello there and hey as keywords. If a viewer were to use any of these in their message our bot would immediately reply. The Global Cooldown means everyone in the chat has to wait a certain amount of time before they can use that command again. If the value is set to higher than 0 seconds it will prevent the command from being used again until the cooldown period has passed. Once you have done that, it’s time to create your first command.

Having a lurk command is a great way to thank viewers who open the stream even if they aren’t chatting. A lurk command can also let people know that they will be unresponsive Chat PG in the chat for the time being. The added viewer is particularly important for smaller streamers and sharing your appreciation is always recommended.

In the above example you can see we used ! Followage, this is a commonly used command to display the amount of time someone has followed a channel for. This list is not exhaustive and some variables may work with sub-actions / events even though they do not specifically state compatibility. If you stream to YouTube, your stream needs to be a public stream, otherwise the bot will not join and they will not trigger. If you have a Streamlabs tip page, we’ll automatically replace that variable with a link to your tip page.

streamlabs command variables

Variables are sourced from a text document stored on your PC and can be edited at any time. Each variable will need to be listed on a separate line. Feel free to use our list as a starting point for your own. Similar to a hug command, the slap command one viewer to slap another. The slap command can be set up with a random variable that will input an item to be used for the slapping.

I don’t have much experience with it but i need the following command. The Reply In setting allows you to change the way the bot responds.

Click here to enable Cloudbot from the Streamlabs Dashboard, and start using and customizing commands today. To get familiar with each feature, we recommend watching our playlist on YouTube. These tutorial videos will walk you through every feature Cloudbot has to offer to help you maximize your content. Cracked $tousername is $randnum(1,100)% cracked. Viewers can use the next song command to find out what requested song will play next. Like the current song command, you can also include who the song was requested by in the response.

Tag a Random User in Streamlabs Chatbot Response

Check out part two about Custom Command Advanced Settings here. This is useful for when you want to keep chat a bit cleaner and not have it filled with bot responses. Variables are pieces of text that get replaced with data coming from chat or from the streaming service that you’re using. If you aren’t very familiar with bots yet or what commands are commonly used, we’ve got you covered. In this new series, we’ll take you through some of the most useful features available for Streamlabs Cloudbot. We’ll walk you through how to use them, and show you the benefits.

streamlabs command variables

If you don’t see a command you want to use, you can also add a custom command. To learn about creating a custom command, check out our blog post here. Streamlabs chatbot allows you to create custom commands to help improve chat engagement and provide information to viewers. Commands have become a staple in the streaming community and are expected in streams. Use $setvar(variablename,value) inside or outside of $ifs.

Best OBS Settings for Streaming in 2024

Customize this by navigating to the advanced section when adding a custom command. Most events will always include all generic arguments in addition to their own documented variables. Any exceptions will be listed on the page detailing that function. To use Commands, you first need to enable a chatbot. Streamlabs Cloudbot is our cloud-based chatbot that supports Twitch, YouTube, and Trovo simultaneously. With 26 unique features, Cloudbot improves engagement, keeps your chat clean, and allows you to focus on streaming while we take care of the rest.

Both types of commands are useful for any growing streamer. It is best to create Streamlabs chatbot commands that suit the streamer, customizing them to match the brand and style of the stream. Shoutout commands allow moderators to link another streamer’s channel in the chat.

  • Variables are pieces of text that get replaced with data coming from chat or from the streaming service that you’re using.
  • Below is a list of commonly used Twitch commands that can help as you grow your channel.
  • If you want to learn the basics about using commands be sure to check out part one here.

The parameter is itself implemented in a Python script, so you’d still have to set your bot up to use Python scripts. Some variables/parameters are unrestricted, while others are restricted to specific sections of Cloudbot. As you can see in the Loyalty section, some commands say only Loyalty, while others say Custom Commands and Loyalty. The ones that indicate Loyalty can only be used within the default loyalty commands, while the ones that say Custom Commands are unrestricted.

To use one of your variables, simply do in any chatbot output (except script messages). $setvar(variablename,value)
$varPE(variablename,increment) – adds the increment to the variable. $varME(variablename,decrement) – removes the decrement from the variable. If you are unfamiliar, adding a Media Share widget gives your viewers the chance to send you videos that you can watch together live on stream. This is a default command, so you don’t need to add anything custom.

As a streamer, you always want to be building a community. Having a public Discord server for your brand is recommended as a meeting place for all your viewers. Having a Discord command will allow viewers to receive an invite link sent to them in chat. Uptime commands are common as a way to show how long the stream has been live. It is useful for viewers that come into a stream mid-way.

Now click “Add Command,” and an option to add your commands will appear. Next, head to your Twitch channel and mod Streamlabs by typing /mod Streamlabs in the chat. Set up rewards for your viewers to claim with their loyalty points. If you have any questions or comments, please let us know. Want to learn more about Cloudbot Commands?

Current Song

Keywords are another alternative way to execute the command except these are a bit special. Commands usually require you to use an exclamation point and they have to be at the start of the message. User Cooldown is on an individual basis. If one person were to use the command it would go on cooldown for them but other users would be unaffected. If you want to learn more about what variables are available then feel free to go through our variables list HERE.

If you are a larger streamer you may want to skip the lurk command to prevent spam in your chat. We hope you have found this list of Cloudbot commands helpful. Remember to follow us on Twitter, Facebook, Instagram, and YouTube. This could be anything, as long as it follows the mode rules below. The mode will specify how the script should compare the two comparers. The modes and what they do are listed below
the fourth argument is the message that should be sent when the condition is met.

If you stream to YouTube, your stream needs to be a public stream, otherwise the bot will not join and they will not work. If you stream to YouTube, your stream needs to be a public stream, otherwise the bot will not join. So USERNAME”, a shoutout to them will appear in your chat. The advanced section contains a lot more customization.

Unlike commands, keywords aren’t locked down to this. You don’t have to use an exclamation point and you don’t have to start your message with them and you can even include spaces. You can foun additiona information about ai customer service and artificial intelligence and NLP. Following as an alias so that whenever someone uses !.

  • Commands have become a staple in the streaming community and are expected in streams.
  • If you have a Streamlabs Merch store, anyone can use this command to visit your store and support you.
  • You can tag a random user with Streamlabs Chatbot by including $randusername in the response.
  • Your stream viewers are likely to also be interested in the content that you post on other sites.

Uptime commands are also recommended for 24-hour streams and subathons to show the progress. A hug command will allow a viewer to give a virtual hug to either a random viewer or a user of their choice. Streamlabs chatbot will tag both users in the response. An Alias allows your response to trigger if someone uses a different command. In the picture below, for example, if someone uses !

A time command can be helpful to let your viewers know what your local time is. The biggest difference is that your viewers don’t need to use an exclamation mark to trigger the response. All they have to do is say the keyword, and the response will appear in chat.

Not the answer you’re looking for? Browse other questions tagged if-statementchatbotequations or ask your own question.

Typically shoutout commands are used as a way to thank somebody for raiding the stream. We have included an optional line at the end to let viewers know what game the streamer was playing last. In part two we will be discussing some of the advanced settings for the custom commands available in Streamlabs Cloudbot. If you want to learn the basics about using commands be sure to check out part one here. Twitch commands are extremely useful as your audience begins to grow. Imagine hundreds of viewers chatting and asking questions.

Before creating timers you can link timers to commands via the settings. This means that whenever you create a new timer, a command will also be made for it. Promoting your other social media accounts is a great way to build your streaming community. Your stream viewers are likely to also be interested in the content that you post on other sites. You can have the response either show just the username of that social or contain a direct link to your profile.

Any timer that is set in multiples will trigger at the same time. And 4) Cross Clip, the easiest way to convert Twitch clips to videos for TikTok, Instagram Reels, and YouTube Shorts. It streamlabs command variables should work fine, and you’re free to review the code to verify I haven’t done anything malicious. I’ll try to make a reasonable effort to answer reasonable questions as time permits.

This will be parsed only if the condition is met, and has several parameters that can go inside it. The fifth argument is the message that should be sent when the condition is NOT met. This will only be parsed if the condition is NOT met. A current song command allows viewers to know what song is playing.

Wins $mychannel has won $checkcount(!addwin) games today. As a streamer you tend to talk in your local time and date, however, your viewers can be from all around the world. When talking about an upcoming event it is useful to have a date command so users can see your local date. Watch time commands allow your viewers to see how long they have been watching the stream.

It is a fun way for viewers to interact with the stream and show their support, even if they’re lurking. If you wanted the bot to respond with a link to your discord server, for example, you could set the command to ! Discord and add a keyword for discord and whenever this is mentioned the bot would immediately reply and give out the relevant information. If a command is set to Chat the bot will simply reply directly in chat where everyone can see the response. If it is set to Whisper the bot will instead DM the user the response.

This command only works when using the Streamlabs Chatbot song requests feature. If you are allowing stream viewers to make song suggestions then you can also add the username of the requester to the response. To add custom commands, visit the Commands section in the Cloudbot dashboard. As of V2.2.0, this script now features $parsejson, which allows you to pull JSON data from a file, and grab a specific key from it.

streamlabs command variables

The cost settings work in tandem with our Loyalty System, a system that allows your viewers to gain points by watching your stream. They can spend these point on items you include in your Loyalty Store or custom commands that you have created. Don’t forget to check out our entire list of cloudbot variables. Use these to create your very own custom commands. Feature commands can add functionality to the chat to help encourage engagement. Other commands provide useful information to the viewers and help promote the streamer’s content without manual effort.

Streamlabs Chatbot Extended Commands

Gloss +m $mychannel has now suffered $count losses in the gulag. You can tag a random user with Streamlabs Chatbot by including $randusername in the response. Streamlabs will source the random user out of your viewer list. When streaming it is likely that you get viewers from all around the world.

Today we are kicking it off with a tutorial for Commands and Variables. If an event is not documented, you can always use Log All Arguments in a sub-action to see all variables available to you. Get early access and see previews of new features. Connect and share knowledge within a single location that is structured and easy to search. The whole concept of this script obviously revolves around the $if.

Responding to each person is going to be impossible. Commands help live streamers and moderators respond to common questions, seamlessly interact with others, and even perform tasks. Timers are commands that are periodically set off without being activated. You can use timers to promote the most useful commands. Typically social accounts, Discord links, and new videos are promoted using the timer feature.

This is a rather advanced feature, and if you don’t know what this is, feel free to skip this section. To use this, simply use the $parsejson parameter, and provide it with a filepath to a JSON file. Afterwards, use an anchor to specify where in the json file to go. An 8Ball command adds some fun and interaction to the stream. With the command enabled viewers can ask a question and receive a response from the 8Ball.

Do this by clicking the Add Command button. Please note that if you are using line minimums, Cloudbot will count only the last 5 minutes worth of chat toward meeting the line minimums. A user can be tagged in a command response by including $username or $targetname. Hugs — This command is just a wholesome way to give you or your viewers a chance to show some love in your community. Merch — This is another default command that we recommend utilizing. If you have a Streamlabs Merch store, anyone can use this command to visit your store and support you.

The Whisper option is only available for Twitch & Mixer at this time. Timers on Cloudbot are not sequential but are parallel. Parallel timers means that if you have Timer A set for 5 minutes, and Timer B set for 5 minutes, they will both trigger simultaneously.

Commands can be used to raid a channel, start a giveaway, share media, and much more. Each command comes with a set of permissions. Depending on the Command, some can only https://chat.openai.com/ be used by your moderators while everyone, including viewers, can use others. Below is a list of commonly used Twitch commands that can help as you grow your channel.

Go to the default Cloudbot commands list and ensure you have enabled ! Shoutout — You or your moderators can use the shoutout command to offer a shoutout to other streamers you care about. Add custom commands and utilize the template listed as ! Cloudbot from Streamlabs is a chatbot that adds entertainment and moderation features for your live stream. It automates tasks like announcing new followers and subs and can send messages of appreciation to your viewers. Cloudbot is easy to set up and use, and it’s completely free.